WJ16 series thermal resistance Ni1000, NTC, PT100, thermocouple, etc.Nonlinear signal isolation transmitter

Main features:

>> Enter: Ni1000, NTC 10K, NTC 20K,

PT100, PT1000, PT10, Cu50, Cu100,

Heat ionoid J / K / T / E / R / S / B

(The measured temperature range can be customized)

(Also customized nonlinear voltage current signal)

>> Output signal: standard signal such as 4 ~ 20mA, 0 ~ 5V, 0-10V

You can also choose 12V PWM signal output.

>> Auxiliary power supply: 5V, 9V, 12V, 15V or 24V DC single power supply

>> Industrial grade temperature range: - 45 ~ + 85 ° C

>> Precision Level: 0.1 (FSR%, relative to temperature)

>> Contain linear algorithm processing and long line compensation function

>> Isolation withstand voltage: 2500VDC (1MA, 60S), input / output / power three isolation

>> Installation: DIN35 rail installation

>> Dimensions: 106.7x79x35mm

Overview:

The thermal resistance temperature transmitter product developed by Virunui Technology is mainly used for Ni1000, NTC 10K, NTC 20K, PT100, PT1000, PT10, Cu50, Cu100, and thermocouple J / K / T / E / R / S / B type. The isolation and transmission of the sensor signal (the sensor needs to be equipped with itself), which is mainly used to measure various temperature signals. The transmitter has a linearization and long line compensation function, and the data is processed by a single-chip algorithm, ensuring precise corresponding to the output signal and temperature, and the built-in temperature is measured, and the built-in temperature can be used for cold-end compensation. At the factory, according to the national standard division table calibration, completely reached the level 0.1 accuracy requirements. It can also be specially customized according to the index table provided by the user to meet the customer's measurement requirements. The input, output, and the auxiliary power supply are completely isolated (three isolated), which can withstand the isolation withstand voltage of 2500 VDC.


The product is installed in DIN35 international standard rail installation, small size, high precision, stable performance, high cost performance, can be widely used in oil, chemical, electric power, instrumentation and industrial control.

The WJ16 series temperature signal isolation amplifier is very convenient, only the line of temperature signal can be realized. Specific selection can refer to the product selection form, you can also consult the customer service staff of WAYJUN Technology.

General parameters:

Essence ------ 0.1% (relative to temperature)

Enter ------ Ni1000, NTC 10K, NTC 20K, default two-wire input

PT100, PT1000, PT10, Cu50, Cu100, default three-wire input

Adhesive J / K / T / E / R / S / B two-wire input

                   You need to choose a temperature range and output when ordering.

Output ------ standard voltage or current signal. You can also be customized by the user. You can also choose 12V PWM signal output.

Response time ------- ≤100ms

Auxiliary power supply ------- DC5V, 9V, 12V, 15V, 24V

Power rate ------- <1W

Temperature drift ------- 50ppm / ° C (typ)

Load capacity ------- Voltage output: ≥ 2 kΩ

Current output: ≤ 450Ω

Isolated ------- Signal Input / Output / Output / Auxiliary Power Supply 3 Isolation

Isolation voltage ------- 2500VDC, 1 minute, leakage current 1mA

Impact resistant voltage ------- 3kV, 1.2 / 50US (peak)

Work temperature -------40 ~ + 85 ° C

Storage temperature -------40 ~ + 85 ° C

Work humidity ------- 10 ~ 90% (no condensation)

Storage humidity ------- 10 ~ 95% (no condensation)

Write a review

Note: HTML is not translated!
    Bad           Good

Thermoelectric resistance Ni1000, NTC, PT100, thermocouple, etc. Nonlinear signal isolation transmitter WJ16

  • Product Code: WJ16
  • Availability: In Stock
  • $66.50

  • Ex Tax: $66.50