Hot sell：Potentiometer, electronic ruler, resistance signal isolation transmitter (DIN rail mounting) DIN11-IAP-R□-P□-□□

Main features:

>> Input: Input Potentiometer or Resistance Signal: 0-50Ω / 0-100Ω / 0-200Ω /

0-500Ω / 0-1kΩ / 0-2kΩ / 0-5kΩ / 0-10kΩ

>> Output signal: Output standard voltage signal: 0-5V / 0-10V / 1-5V / 0- ± 5V / 0- ± 10V

Or output standard current signal: 0-10mA / 0-20mA / 4-20mA

>> Auxiliary power supply: 5V, 9V, 12V, 15V or 24V DC single power supply

>> Industrial grade temperature range: - 45 ~ + 85 ° C

>> Accuracy Level: 0.1, 0.2

>> Isolation withstand voltage: 2500VDC (1MA, 60S), input / output / power three isolation

>> Installation: DIN35 rail installation

>> Dimensions: 79x69.5x25mm

typical application:

>> Displacement measurement, angular measurement

>> Isolation and transmission of potentiometer

>> Measurement of resistance resistance

Overview:

The electronic scale signal transmitter product developed by Virunui Technology is mainly used for isolation and transmission of 0-5k, 0-10K and other displacement or angular sensor signals (sensor needs to be equipped with itself), mainly for signals in the industry Isolation and transmission. The transmitter input is a constant voltage driver for a 3-wire sensor. If it is a 2-wire sensor, it is also possible to form a constant current drive mode as required. The input, output, and the auxiliary power supply are completely isolated (three isolated), which can withstand the isolation withstand voltage of 2500 VDC. The product is installed in DIN35 international standard rail installation, small size, high precision, stable performance, high cost performance, can be widely used in oil, chemical, electric power, instrumentation and industrial control.

This series of electronic-scale signal isolation amplifiers is very convenient, and only the isolation and transmission of the displacement signal can be realized.

General parameters:

Essence ------ 0.2%

Enter ------- Electronic ruler, potentiometer, displacement sensor, angle sensor, potentiometer, resistance, etc.

Output ------ standard voltage or current signal. You can also be customized by the user.

Response time ------- <10ms

Auxiliary power supply ------- DC5V, 9V, 12V, 15V, 24V

Power rate ------- <1W

Temperature drift ------- 50ppm / ° C (typ)

Load capacity ------- Voltage output: ≥ 2 kΩ

Current output: ≤ 450Ω

Isolated ------- signal input / output / auxiliary power supply three isolated

Isolation voltage ------- 2500VDC, 1 minute, leakage current 1mA

Impact resistant voltage ------- 3kV, 1.2 / 50US (peak)

Work temperature -------40 ~ + 85 ° C

Storage temperature -------45 ~ + 80 ° C

Work humidity ------- 10 ~ 90% (no condensation)

Storage humidity ------- 10 ~ 95% (no condensation)